Galileo In-Orbit Validation

The Pre-Galileo GIOVE (Galileo In-Orbit Validation Element) Satellites

The GIOVE satellites were aimed at testing Galileo positioning system technologies in orbit.


GIOVE-A, was launched in December 2005, its primary goal being to claim the frequencies allocated to Galileo by the International Telecommunications Union (ITU). It has also been used to test the design of two on-board rubidium atomic clocks.

GIOVE-A was the first European satellite to be launched into medium Earth orbit (MEO). It carries two environmental monitors that have been in operation almost continuously since launch, gathering vital data about the Galileo intermediate circular orbit environment and helping in the design of the full constellation.


Launched in April 2008, GIOVE-B was the first satellite to actually transmit Galileo signals. After launch, early orbit operations and platform commissioning, GIOVE-B's navigation payload was switched on and signal transmission commenced.

Key facilities in the testing of GIOVE-B signals include the GIOVE-B Control Centre at Telespazio's facilities in Fucino, Italy, the Galileo Processing Centre at ESA's European Space Research and Technology Centre (ESTEC) in the Netherlands, the ESA ground station at Redu, Belgium, and the Rutherford Appleton Laboratory (RAL) Chilbolton Observatory in the United Kingdom.


GIOVE-A2 essentially extended the mission of its predecessor, GIOVE-A, securing the Galileo programme by maintaining the critical ITU frequency and facilitating the ongoing development of ground equipment.


Galileo satellite testbeds: GIOVE

In 2004 the Galileo System Test Bed Version 1 (GSTB-V1) project validated the on-ground algorithms for Orbit Determination and Time Synchronisation (OD&TS). This project, led by ESA and European Satellite Navigation Industries, has provided industry with fundamental knowledge to develop the mission segment of the Galileo positioning system.

GIOVE-A is the first GIOVE (Galileo In-Orbit Validation Element) test satellite. It was built by Surrey Satellite Technology Ltd (SSTL), and successfully launched on 28 December 2005 by the European Space Agency and the Galileo Joint. Operation of GIOVE-A ensured that Galileo meets the frequency-filing allocation and reservation requirements for the International Telecommunication Union (ITU), a process that was required to be complete by June 2006.

GIOVE-B, built by Astrium and Thales Alenia Space, has a more advanced payload than GIOVE-A. It was successfully launched on 27 April 2008 aboard a Soyuz-FG/Fregat rocket provided by Starsem.

A third satellite, GIOVE-A2, was originally planned to be built by SSTL for launch in the second half of 2008, but the construction was terminated due to the successful launch and in-orbit operation of GIOVE-B.


In-Orbit Validation (IOV) satellites

These testbed satellites were followed by four IOV Galileo satellites that are much closer to the final Galileo satellite design. The Search & Rescue feature is not installed. The first two satellites were launched on 21 October 2011 from Guiana Space Centre using a Soyuz launcher, the other two on 12 October 2012.  These 4 IOV Galileo satellites were constructed by Astrium GmbH and Thales Alenia Space. On 12 March 2013, a first fix was performed using those four IOV satellites. is funded by the European Union within Horizon 2020, the EU Framework Programme for Research and Innovation, under grant agreement no 641615.